Denon AVR-3311CI - 2.3. Clearing the protection history; Warning indication by the POWER LED

20
2.3. Clearing the protection history
Therearetwowaystocleartheprotectionhistory,asdescribedbelow.
(1) Startuptheerror(protectiondisplay)mode,displaytheerror,thenpressandholdinthe"ENTER"buttonfor3seconds.
Upper
P R O T E C T H I S T O R Y
Lower
: T H E R M A L
 Pressandholdinthe"ENTER"buttonfor3seconds.
Upper
P R O T E C T H I S T O R Y
Lower
C L E A R
 Theaboveisdisplayedandtheprotectionhistoryiscleared.
Upper
P R O T E C T H I S T O R Y
Lower
: N O P R O T E C T
(2) Initialize.(Referto"InitializingAVSURROUNDRECEIVER"5page.)
b
Ifyouwanttosaveabackup,usethemethodin2.3.(1)above.
Warning indication by the POWER LED
Ifthepoweristurnedoffwhenaprotectionincidenthasbeendetected,thePOWERLED(red)ashesasawarning
accordingtotheconditionsinwhichtheprotectionincidentoccurred.
(1) ASO/DCPROTECTION:Flashesincyclesof0.5seconds(0.25secondslit,0.25secondsoff)
(2) THERMALPROTECTION:Flashesincyclesof2seconds(1secondlit,1secondoff)