54
Error
Code
Details of Error code Display Coping strategies
81
Failure to delete data before
rewriting serial ash.
O S D * * * m i n
U p d a t i n g f a i l 8 1
Turn the power off then back on.
Updating starts automatically.
82
Failure to receive rmware for serial
ash rewriting sent by DM860 (when
timed out).
O S D * * * m i n
U p d a t i n g f a i l 8 2
Turn the power off then back on.
Updating starts automatically.
83
Failure to receive rmware for serial
ash rewriting sent by DM860 (when
an error).
O S D * * * m i n
U p d a t i n g f a i l 8 3
Turn the power off then back on.
Updating starts automatically.
84
Failure to receive rmware for serial
ash rewriting sent by DM860 (when
a Check Sum error).
O S D * * * m i n
U p d a t i n g f a i l 8 4
Turn the power off then back on.
Updating starts automatically.
85
Failure to receive rmware for serial
ash rewriting sent by DM860 (when
invalid data received).
O S D * * * m i n
U p d a t i n g f a i l 8 5
Turn the power off then back on.
Updating starts automatically.
86
Failure to rewrite when writing data
in serial ash.
O S D * * * m i n
U p d a t i n g f a i l 8 6
Turn the power off then back on.
Updating starts automatically.
A0
Failure to acquire (Application
Mode) IP address before rewriting
DM860 (AutoIP).
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l A 0
Check the network connection.
Carry out the update in an environment
that has little network load.
A1
Failure to acquire (Application
Mode) IP address before rewriting
DM860 (when timed out).
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l A 1
Check the network connection.
Carry out the update in an environment
that has little network load.
A2
Notication of invalid login via DPMS
access when rewriting DM860
related rmware (Application Mode).
E t h e r I M G * * * m i n
L o g i n f a i l e d A 2
Check the network connection.
Carry out the update in an environment
that has little network load.
A3
Notication of line congestion
via DPMS access when rewriting
DM860 related rmware (Application
Mode).
E t h e r I M G * * * m i n
S e r v e r i s b u s y A 3
Check the network connection.
Carry out the update in an environment
that has little network load.
A4
Notication of connection failure
via DPMS access when rewriting
DM860 related rmware (Application
Mode).
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l A 4
Check the network connection.
Carry out the update in an environment
that has little network load.
A6
Firmware data error message
received after DPMS login when
rewriting DM860 related rmware
(Application Mode).
E t h e r I M G * * * m i n
U p d a t i n g f a i l A 6
Turn the power off then back on.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
A7
When rewriting DM860 related
rmware (Application Mode),
request was made for rmware data
after DPMS login but it timed out.
E t h e r I M G * * * m i n
U p d a t i n g f a i l A 7
Turn the power off then back on.
Updating starts automatically.
Carry out the update in an environment
that has little network load.
A8
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM860 (AutoIP).
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l A 8
Check the network connection.
Carry out the update in an environment
that has little network load.
A9
Failure to acquire (Boot Loader
Mode) IP address before rewriting
DM860 (when timed out).
E t h e r I M G * * * m i n
C o n n e c t i o n F a i l A 9
Check the network connection.
Carry out the update in an environment
that has little network load.
AA
Notication of invalid login via
DPMS access when rewriting
DM860 related rmware (Boot
Loader Mode).
E t h e r I M G * * * m i n
L o g i n f a i l e d A A
Check the network connection.
Carry out the update in an environment
that has little network load.