58
107
ENGLISH
Basic versionSimple version Advanced version Information
Surround
Surround mode
Surround Parameter
Tone
z19
Audyssey Settings
z24
Audyssey
DSX™
z24 z25
RESTORER
z23
AFDM
z11
S.Back
F.Height
z17
Height Gain
z18
Speaker Subwoofer
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama Dimension C.Width C.Image MultEQ
®
XT
Dynamic EQ
®
z21
Dynamic
Volume™
z22
PURE DIRECT
S
z3
DIRECT (2 channel)
S
z3
DIRECT (Multi-channel)
STEREO
S S S S S
MULTI CH IN
S S S S S S S S S
DOLBY PRO LOGIC gz S S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S S S
DOLBY PRO LOGIC
S S S S S S S S S S S
DOLBY PRO LOGIC g A-DSX S S S S S S S S S
DOLBY PRO LOGIC A-DSX
S S S S S S S S S
DTS NEO:6
S S S S S S S S
DTS NEO:6 A-DSX
S S S S S S S
Audyssey DSX
S S S S S
DOLBY DIGITAL
S S S S S S S S S
DOLBY DIGITAL Plus
S S S S S S S S S
DOLBY TrueHD
S S S S S S S S S
DTS SURROUND
S S S S S S S S S
DTS 96/24
S S S S S S S S S
DTS-HD
S S S S S S S S S
DTS Express
S S S S S S S S S
MULTI CH STEREO
S S S S S S S
ROCK ARENA
S S S
z20
S S S S
JAZZ CLUB
S S S S S S S
MONO MOVIE
S S S S S S S
VIDEO GAME
S S S S S S S
MATRIX
S S S S S S S
VIRTUAL
S S S S S
z3 Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output from the subwoofer.
z17 If “Speaker Config.” – “F.Height” is set to “None”, this item cannot be selected.
z18 This item can be selected when “Surround Parameter” – “F.Height” is set to “ON”.
z19 This item cannot be set when “Dynamic EQ” is set to “ON”.
z20 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z21 This item cannot be set when “MultEQ XT” is set to “OFF” or “Manual”.
z22 This item cannot be set when “Dynamic EQ” is set to “OFF”.
z23 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z24 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z25 This item can not be selected when “Surround Parameter” – “F.Height” is set to “ON”.
To Next Page
Loading...
