Denon AVR-4802 - DTS Neo:6 Mode Setup; Configuring DTS Neo:6 Parameters

51
DTS Neo:6 mode
1
Select the DTS NEO:6 mode.
DOLBY / DTS
SELECT
(Main unit) (Main unit)
Surround playback can be conducted for the analog input and PCM
digital input 2-channel signals.
1, 41 3, 4
(Remote control unit)
2
Play a program source.
3
Disolay the Surround Parameter Menu.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
SURROUND
PARAMETER
SELECT
4
Set the various surround parameters.
(Main unit) (Remote control unit)
1
4
4, 5
3
5
Enter the setting.
(Remote control unit)
NOTES:
• When “Default” is selected and the jog stick is moved to the left, “MODE” and “TONE” are automatically set to the default value.
• In addition, “CINEMA EQ.” is set to OFF.
• Select CINEMA or MUSIC. (CINEMA is
optimum for movies, MUSIC is optimum
for music software.)