EasyManuals Logo

Denon AVR-791 Service Manual

Denon AVR-791
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
37
YES
YES
YES
YES
NO
NO
NO
NO
NO
YES
YES
YES
No picture or sound is output.
Check BD/DVD player.
Check HDMI/DVI cable connection.
(1) Is the HDMI/DVI cable properly connected?
(3) Are you using a certied HDMI cable (one with the HDMI stamp)?
(3) Are you using an HDMI/DVI cable less than 5 meters in length?
(4) Are the picture and sound output when another HDMI/DVI cable
is used?
(2) Are you using an HDMI/DVI selector, repeater or a device for
improving picture quality?
(5) Is the BD/DVD player's HDMI output setting correct?
(7)
Are the picture and sound output
when the BD/DVD player's
resolution is changed?
(9) Are the picture and sound
output when a different BD/
DVD player's is used?
(6) When using a DENON BD/DVD player's, is the uorescent
display tube's "HDMI" indicator lit? If using a non-DENON BD/
DVD player's, proceed to
"YES".
(8) Is sound output from the set's speaker terminals when the TV's
power is turned off or the connection cable between the TV and
the set is disconnected?
There may be a problem with the HDMI/DVI
cable. Check connection.
Use a certied HDMI cable (one with the
HDMI stamp).
Replace the HDMI/DVI cable with one that
is less than 5 meters in length (2 meters
recommended) to check.
The HDMI/DVI cable is defective.
Disconnect everything and connect only the
HDMI/DVI cable to check
Check HDMI output setting, referring to the
BD/DVD player's operating instructions.
Set the BD/DVD player's output resolution to
a resolution with which the TV is compatible.
The BD/DVD player's is defective.
The BD/DVD player's may not be compatible
with HDCP repeaters. Ask the BD/DVD
player's manufacturer.
NO
NO
NO
YES
YES
YES
YES
YES
YES
3. HDMI/DVI
3.1. No picture or sound is output

Table of Contents

Other manuals for Denon AVR-791

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-791 and is the answer not in the manual?

Denon AVR-791 Specifications

General IconGeneral
Number of Channels7.1
HDMI Inputs4
HDMI Outputs1
Audyssey TechnologiesAudyssey MultEQ, Audyssey Dynamic Volume, Audyssey Dynamic EQ
4K Pass-ThroughNo
Signal-To-Noise Ratio100 dB
HDMI SwitchingYes
Input Sensitivity200 mV
THD0.08%
Surround Sound EffectsYes
Digital Sound Processor (DSP)Yes
DSP Preset Qty7
Tuner BandsAM/FM
Preset Station Qty56
Auto Preset MemoryYes
HDMI Pass-ThroughYes
Frequency Response10Hz-100kHz
Power Output90 W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Dolby TechnologiesDolby Digital Plus, Dolby TrueHD
DTS TechnologiesDTS, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Neo:6
Response Bandwidth10 - 100000 Hz
Input Impedance47 kΩ
Audio D/A Converter24-bit / 192kHz
DSP PresetsRock Arena, Jazz Club, Mono Movie, Matrix, Virtual, Game
Tuning RangeAM: 520 - 1710 kHz, FM: 87.5 - 108 MHz
Connector TypeHDMI
Amplifier Output Details90W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Video ConversionYes (Composite to HDMI)

Related product manuals