What does 'CHECK ANTENNA' mean on my Denon Stereo Receiver in XM mode?
If “CHECK ANTENNA” is displayed in the XM mode on your Denon AVR-887, verify that the AVR-887’s XM connectors and the XM Passport System are properly connected.
How to fix 'NO SIGNAL' on my Denon Stereo Receiver in XM mode?
If “NO SIGNAL” is displayed in the XM mode on your Denon AVR-887, try repositioning your XM Passport System to improve signal reception.
What does 'OFF AIR' mean on my Denon Stereo Receiver in XM mode?
If “OFF AIR” is displayed in the XM mode on your Denon AVR-887, it means the selected channel is not currently broadcasting. Select another channel.
Why am I only getting XM channels 0 and 1 on my Denon Stereo Receiver?
If you are only receiving XM channels 0 and 1 on your Denon AVR-887, the XM Tuner is likely not activated. Contact XM Radio to activate it.
Power| rated output front | 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
|---|---|
| rated output front alternative | 135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD) |
| rated output center | 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
| rated output center alternative | 135 W (6 ohms, 1 kHz, 0.7 % THD) |
| rated output surround | 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
| rated output surround alternative | 135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD) |
| rated output surround back | 100 W + 100 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD) |
| rated output surround back alternative | 135 W + 135 W (6 ohms, 1 kHz, 0.7 % THD) |
| power supply | AC 120 V, 60 Hz |
| power consumption | 5.5 A |
Audio Inputs and Outputs| analog inputs | 9 sets |
|---|---|
| analog ext inputs | 8 |
| digital inputs optical | 4 |
| digital inputs coaxial | 2 |
| audio delay function | 0 - 200 msec. |
| variable subwoofer crossover | 40/60/80/90/100/110/120/150/200/250 Hz |
Video Inputs and Outputs| component video inputs | 3 sets |
|---|---|
| composite inputs | 5 |
| s-video inputs | 5 |
| component video outputs | 1 set |
| composite outputs | 3 |
| s-video outputs | 3 |
Audio Performance| frequency response | 10 Hz - 100 kHz (+1, -3 dB) |
|---|---|
| signal-to-noise ratio | 100 dB (IHF-A weighted) |
| tone control treble | ±6 dB at 10 kHz |
| tone control bass | ±6 dB at 100 Hz |
Weight and Dimensions| dimensions | 17-3/32” (W) x 6-47/64” (H) x 16-27/64” (D) |
|---|---|
| dimensions metric | 434 (W) x 171 (H) x 417 (D) mm |
| weight | 29 lbs 5 oz |
| weight metric | 13.0 kg |
Warning about electric shock hazard and user serviceability.
Precautions to prevent fire or electric shock due to exposure.
Advice on safe and proper placement of the unit.
Diagram showing an example of speaker placement for surround sound.
Instructions for connecting speakers to the unit.
Guide to connecting DVD players and monitors for audio/video.
Explanation of the automatic speaker setup and room equalization.
Manual configuration of speaker system parameters.
To Next Page
