Denon AVR-E400 User Manual

38
Listening to FM/AM broadcasts
n Tuning in by entering the radio frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press TUNER to switch the input source to “TUNER”.
2
Press OPTION.
The option menu screen is displayed.
3
Use ui to select “Direct Tune”,
then press ENTER.
The direct tuner screen is displayed and
“–” in the display flashes.
GTV ScreenH
TUNE+/-
STEREO
AUTO
CH / OPTION
TUNER
FM 92.10MHz
Now Playing
Tune Preset Option
Option
FM/AM
Direct Tune
Preset Memory
Tune Mode
Auto Preset Memory
Preset Name
Preset Skip
Video Select
GDisplay of this unitH
Direct Tune
4
Use ui to select a number and press p.
The screen that lets you enter the frequency is displayed.
GTV ScreenH
STEREO
AUTO
TUNER
DIRECT TUNE
Now Playing
Input Enter
FM ---.--MHz
GDisplay of this unitH
Direct Tune
FM ---.--MHz
•If o is pressed, the immediately preceding input is cancelled.
5
Repeat step 4 and enter the frequency of the radio
station you want to hear.
6
When setting is completed, press ENTER.
The preset frequency is tuned in.
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Denon AVR-E400 Specifications

General

HDMI Inputs	6
HDMI Outputs	1
3D Pass-through	Yes
4K Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Audyssey MultEQ	Yes
Network Connectivity	Yes
AirPlay	Yes
DLNA	Yes
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Response Bandwidth	10 Hz - 100 kHz
THD	0.08%
Tuner Presets	56
Tuner Bands	AM/FM
Frequency Response	10 Hz - 100 kHz
Video Upscaling	Yes
Bluetooth	No
Wi-Fi	No
Surround Sound Effects	DTS Neo:6
Audio D/A Converter	192kHz/24-bit
Inputs	HDMI, Digital Optical, Digital Coaxial, Analog
Outputs	HDMI, Headphones