Denon AVR-E400 User Manual

96
Menu map
Setting items Detailed items Description Page
General
Language Sets the language for display the menu on the
TV screen.
124
ZONE2 Setup Makes settings for audio playback in a ZONE2
system.
124
Zone Rename Change the display title of each zone to one you
prefer.
124
Quick Select Names Change the “Quick Select” display title to one
you prefer.
125
Auto Standby When you do not perform any operation on this
unit with no audio or video input for a specified
time, this unit automatically enters the standby
mode. Before it enters the standby mode, “Auto
Standby” is displayed on the display of this unit
and the menu screen.
125
Front Display Makes settings related to the display on this unit.
125
Information Show information about receiver settings, input
signals, etc.
126
Usage Data Selects whether or not to send anonymous
usage data to Denon.
127
Firmware Set whether or not to check for firmware update,
update the firmware, and display update and
upgrade notifications.
127
Setup Lock Protect settings from inadvertent changes.
128
Setup
Assistant
Perform the installation, connection, and setup procedures to prepare the
unit for operation following guidance from the setup section of this manual.
C 7
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD

Denon AVR-E400 Specifications

General

HDMI Inputs	6
HDMI Outputs	1
3D Pass-through	Yes
4K Pass-through	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Audyssey MultEQ	Yes
Network Connectivity	Yes
AirPlay	Yes
DLNA	Yes
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Response Bandwidth	10 Hz - 100 kHz
THD	0.08%
Tuner Presets	56
Tuner Bands	AM/FM
Frequency Response	10 Hz - 100 kHz
Video Upscaling	Yes
Bluetooth	No
Wi-Fi	No
Surround Sound Effects	DTS Neo:6
Audio D/A Converter	192kHz/24-bit
Inputs	HDMI, Digital Optical, Digital Coaxial, Analog
Outputs	HDMI, Headphones