Error
Code
Details of Error code Display Coping strategies
5D
Abnormal data in UpdatePacket
received from CX870 (FormatEr-
ror).
U p d a t i n g f a i l 5 D
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
5E
Abnormal data in UpdatePacket
received from CX870 (CheckSum-
Error).
U p d a t i n g f a i l 5 E
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
5F
Abnormal data in UpdatePacket
received from CX870 (Data-
Length/DataNo).
U p d a t i n g f a i l 5 F
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
60
NACK received in response or no
response from Sub for P com-
mand.
U p d a t i n g f a i l 6 0
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
61
Mismatched CheckSum in re-
sponse or no response from Sub
for I command.
U p d a t e C h e c k N G 6 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
62
Failed to start up Sub in PowerOn
sequence during Update.
U p d a t i n g f a i l 6 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
63
Failed to transit to Application-
Mode.
U p d a t i n g f a i l 6 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
64
Failed to transit to BootLoader-
Mode.
U p d a t i n g f a i l 6 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
80
WriteEnableLatchBit not set in
Read after issuing WREN com-
mand.
U p d a t i n g f a i l 8 0
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
81
BlockErase failed in Read after
issuing BE command.
U p d a t i n g f a i l 8 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
82
No UpdatePacket received from
CX870 (TimeOut).
U p d a t i n g f a i l 8 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
83
Abnormal data in UpdatePacket
received from CX870 (FormatEr-
ror).
U p d a t i n g f a i l 8 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
84
Abnormal data in UpdatePacket
received from CX870 (CheckSum-
Error).
U p d a t i n g f a i l 8 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
85
Abnormal data in UpdatePacket
received from CX870 (Data-
Length/DataNo).
U p d a t i n g f a i l 8 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
60
To Next Page
Loading...
Need help?
General
