Tone Control
z
7
(v
p. 111)
Audyssey (v p. 152)
Restorer
z
10
(v
p. 150)
Pro Logicg/gx Music mode only
Neo: 6
Music
modes only
Panorama
(v p. 147)
Dimension
(v p. 148)
Center
Width
(v p. 148)
Center
Image
(v p.
147)
MultEQ
®
XT
z
8 (v p. 152)
Dynamic EQ
z
9
(v p. 153)
Dynamic
Volume
z
9 (v p. 154)
Direct/Pure Direct (2-channel)
z
5
Direct/Pure Direct (Multi-channel)
z
5
Stereo
S S S S
Multi Ch In
S S S S
Dolby Pro Logic gz S S S S S
Dolby Pro Logic gx S S S S S S S S
Dolby Pro Logic g S S S S S S S S
DTS Neo:6
S S S S S S
Dolby Digital
S S S S
Dolby Digital Plus
S S S S
Dolby TrueHD
S S S S
DTS Surround
S S S S
DTS 96/24
S S S S
DTS-HD
S S S S
DTS Express
S S S S
Multi Ch Stereo
S S S S S
Rock Arena
S
z
11
S S S S
Jazz Club
S S S S S
Mono Movie
S S S S S
Video Game
S S S S S
Matrix
S S S S S
Virtual
S S S S S
z
5,
z
7 -
z
11: “Sound modes and surround parameters” (v p. 240)
z1
This item can be selected when a Dolby TrueHD signal is played.
z2
This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
z3
This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z4 This setting is available when the set sound mode name contains “+PLgz”.
z5
During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z6 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 188)
z7 This item cannot be set when “Dynamic EQ” is set to “On”. (v
p. 153)
z8
This item cannot be set when Audyssey
®
Setup (Speaker Calibration) has not been performed.
z9
This item cannot be set when “MultEQ
®
XT” is set to “Off”. (v p. 152)
z10
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z11
In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
To Next Page
Loading...
Need help?
General
