To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Denon AVR-X2000 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Frequency range | 10 - 100000 Hz |
| Output impedance | 16 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Power output per channel (1KHz@6 Ohm) | 125 W |
| Power output per channel (20-20KHz@8 Ohm) | 95 W |
| HDMI in | 7 |
| AC (power) in | Yes |
| Audio (L/R) in | 4 |
| Composite video in | 2 |
| Component video (YPbPr/YCbCr) in | 1 |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | JPG |
| Wi-Fi | No |
| RDS features | PTY, TP |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | FM |
| Internet radio services supported | Spotify, vTuner |
| Supported video modes | 1080i, 1080p, 480p, 576p, 720p |
| Display | VFL |
| Color depth | 24 bit |
| Aspect ratio | 4:3, 16:9 |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Apple docking compatibility | Not supported |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 500 W |
Weight and Dimensions| Depth | 330 mm |
|---|---|
| Width | 434 mm |
| Height | 167 mm |
| Weight | 9500 g |
