Denon AVR-X2000 - Page 60

2.3. About the error code
See the table below for error codes, details of faults, and coping strategies when the rmware is updated through DPMS
(Denon Product Management Server).
Error
Code
Details of Error code Display Coping strategies
01 Log-in to DPMS failed.
L o g i n f a i l e d 0 1
Reset and update again.
Carry out the update in an
environment that has little network
load.
02
Line, etc., is busy when logging into
DPMS.
S e r v e r i s b u s y 0 2
Carry out the update in an
environment that has little network
load.
03 Connection to DPMS failed.
C o n n e c t i o n F a i l 0 3
Check the network connection.
Carry out the update in an
environment that has little network
load.
04
Firmware le data was requested
but error message was received.
C o n n e c t i o n F a i l 0 4
Check the network connection.
Carry out the update in an
environment that has little network
load.
05
Firmware le data was requested
but it timed out.
C o n n e c t i o n F a i l 0 5
Check the network connection.
Carry out the update in an
environment that has little network
load.
06
Firmware le data was requested
but error message was received.
C o n n e c t i o n F a i l 0 6
Check the network connection.
Carry out the update in an
environment that has little network
load.
07
All rmware le data was requested
but it timed out.
C o n n e c t i o n F a i l 0 7
Check the network connection.
Carry out the update in an
environment that has little network
load.
08
Firmware le data of Main CPU was
requested but error message was
received.
C o n n e c t i o n F a i l 0 8
Check the network connection.
Carry out the update in an
environment that has little network
load.
09
Firmware le data of Main CPU was
requested but it timed out.
C o n n e c t i o n F a i l 0 9
Check the network connection.
Carry out the update in an
environment that has little network
load.
0A
Error (NG) message was received
when rmware of Main CPU was
downloaded.
D o w n l o a d f a i l 0 A
Check the network connection.
Carry out the update in an
environment that has little network
load.
0B
Error (line congestion) message was
received when rmware of Main
CPU was downloaded.
D o w n l o a d f a i l 0 B
Check the network connection.
Carry out the update in an
environment that has little network
load.
0C
Error (connection failure) message
was received when rmware of
Main CPU was downloaded.
D o w n l o a d f a i l 0 C
Check the network connection.
Carry out the update in an
environment that has little network
load.
0D Received Package Version is wrong.
D o w n l o a d f a i l 0 D
Check the network connection.
Carry out the update in an
environment that has little network
load.
0E
Connection to DPMS failed.
(can not get NTP)
C o n n e c t i o n F a i l 0 E
Check the network connection.
Carry out the update in an
environment that has little network
load.
10
Main CPU failed to receive rmware
for rewriting sent from
DM860A (when timed out).
U p d a t i n g f a i l 1 0
Turn off and on the power. Updating
starts automatically.
60