Denon AVR-X2000 Service Manual

Error
Code
Details of Error code Display Coping strategies
A2
Invalid login via DPMS access was
notied when DM860A related
rmware was rewritten (Application
Mode).
L o g i n f a i l e d A 2
Check the network connection.
Carry out the update in an
environment that has little network
load.
A3
Line congestion via DPMS access
was notied when DM860A related
rmware was rewritten (Application
Mode).
S e r v e r i s b u s y A 3
Check the network connection.
Carry out the update in an
environment that has little network
load.
A4
Connection failure via DPMS access
was notied when DM860A related
rmware was rewritten (Application
Mode).
C o n n e c t i o n F a i l A 4
Check the network connection.
Carry out the update in an
environment that has little network
load.
A6
Firmware data error message was
received after DPMS login when
DM860A related rmware was
rewritten (Application Mode).
U p d a t i n g f a i l A 6
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
A7
When DM860A related rmware
was rewritten (Application Mode),
request was made for rmware data
after DPMS login but it timed out.
U p d a t i n g f a i l A 7
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
AE
Firmware download error message
received (when download fails)
when DM860A related rmware
was rewritten (Boot Loader Mode).
D o w n l o a d f a i l A E
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
AF
Firmware download error message
received (line congestion) when
DM860A related rmware was
rewritten (Boot Loader Mode).
D o w n l o a d f a i l A F
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
B0
Firmware download error message
received (connection failure) when
DM860A related rmware was
rewritten (Boot Loader Mode).
D o w n l o a d f a i l B 0
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
B1
Firmware download error message.
(Timeout failure)
D o w n l o a d f a i l B 1
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
B2
Error message received when
DM860A related rmware was
rewritten.
D o w n l o a d f a i l B 2
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
B3
Firmware writing error message.
(Timeout failure )
U p d a t i n g f a i l B 3
Turn off and on the power.
Updating starts automatically.
Carry out the update in an
environment that has little network
load.
B4
Mode change failure of DM860A.
(Boot Loader Mode)
U p d a t i n g f a i l B 4
Reset and update again.
B5
Mode change failure of DM860A.
(Application Mode)
U p d a t i n g f a i l B 5
Reset and update again.
64

Denon AVR-X2000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
AC (power) in	Yes
Audio (L/R) in	4
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	167 mm
Weight	9500 g