Denon AVR-X2100W Service Manual

Error
Code
Details of Error code Display Coping strategies
39
Connection to DPMS has timed
out when rewriting the Main CPU.
C o n n e c t i o n F a i l 3 9
Check the network connection. Update
in an environment where there is a
small network load.
3A
Error (NG) notication was re-
ceived when downloading rm-
ware for rewriting the Main CPU.
D o w n l o a d f a i l 3 A
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
3B
Error notication (line congestion)
was received when downloading
rmware for rewriting the Main
CPU.
D o w n l o a d f a i l 3 B
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
3C
Error notication (connection
failure) was received when down-
loading rmware for rewriting the
Main CPU.
D o w n l o a d f a i l 3 C
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
3D
Failed to acquire the IP address
(Auto IP) before CX870 rewrite
(Boot Loader Mode).
C o n n e c t i o n F a i l 3 D
Check the network connection. Update
in an environment where there is a
small network load.
3E
Failed to acquire the IP address
before CX870 rewrite (Boot
Loader Mode) (timed out).
C o n n e c t i o n F a i l 3 E
Check the network connection. Update
in an environment where there is a
small network load.
50
Log in to DPMS failed when rewrit-
ing the DSP, PLD etc. rmware.
L o g i n f a i l e d 5 0
Update in an environment where there
is a small network load.
51
Unit logs in to DPMS to rewrite the
DSP, PLD etc. rmware, but the
line etc. is congested.
S e r v e r i s b u s y 5 1
Update in an environment where there
is a small network load.
52
Connect to DPMS failed when
rewriting the DSP, PLD etc. rm-
ware.
C o n n e c t i o n F a i l 5 2
Check the network connection. Update
in an environment where there is a
small network load.
54
Unit logs in to DPMS to rewrite the
DSP, PLD etc. rmware, but error
was received as rmware informa-
tion.
U p d a t i n g f a i l 5 4
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
55
Unit logs in to DPMS to rewrite
the DSP, PLD etc. rmware, but
logged into DPMS and requested
rmware data information but a
timeout occurred.
U p d a t i n g f a i l 5 5
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
56
Unit logs in to DPMS to rewrite the
DSP, DLP etc. rmware, but failed
to download the rmware.
D o w n l o a d f a i l 5 6
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
57
Unit logs in to DPMS to rewrite
the DSP, DLP etc. rmware, but
download rmware error was
received (line congestion).
D o w n l o a d f a i l 5 7
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
58
Unit logs in to DPMS to rewrite
the DSP, DLP etc. rmware, but
download rmware error was
received (connection failure).
D o w n l o a d f a i l 5 8
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
5A
NACK was received when "C"
command was sent to DSP, PLD
etc.
C o n n e c t i o n F a i l 5 A
Turn on the power again. Update will
start automatically.
5B
NACK was received when "L"
command was sent to DSP, PLD
etc.
U p d a t i n g f a i l 5 B
Turn on the power again. Update will
start automatically.
72

Denon AVR-X2100W Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	8
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Speakers connectivity type	-
Ethernet LAN	Yes
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	167 mm
Weight	9700 g