Denon AVR-X4100W Owner's Manual

Registering preset codes
There are two methods for registering preset codes; the simple method for
registering preset codes of Denon players, and the method for registering
the preset numbers of other manufacturers’ devices.
●
“Registering Denon Players”(v p. 256)
●
“Registering by entering preset numbers”(v
p. 257)
o
Registering Denon Players
Use the following simple method to register the preset codes of Denon
Blu-ray Disc players, DVD players and CD players.
n
Registering Blu-ray Disc Players
1
Press and hold down Blu-ray and OPTION until the
DEV, TV and AVR indicators on the remote are flashing
green, then release.
n
Registering DVD Players
1
Press and hold down DVD and OPTION until the DEV,
TV and AVR indicators on the remote are flashing
green, then release.
n
Registering CD Players
1
Press and hold down CD and OPTION until the DEV, TV
and AVR indicators on the remote are flashing green,
then release.
Contents Connections Playback Settings Tips Appendix
256
Front panel Display Rear panel Remote Index

Denon AVR-X4100W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out connectivity	Yes
Audio output channels	- channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
3D	-
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	12600 g