Denon AVR-X4100W

Error
Code
USB Update Error Display Details of Error code Coping strategies
14
M a i n * * * m i n
U p d a t i n g f a i l 1 4
Block Write failed while rewriting
Main.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
15
M a i n * * * m i n
U p d a t e C h e c k N G 1 5
Error in Verify after rewriting Main
(Check Sum Error).
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
16
M a i n * * * m i n
U p d a t i n g f a i l 1 6
Setup failure of the transfer meth-
od of XModem.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
20
C o n n e c t i o n f a i l
2 0
Unable to detect USB after SBL
Mode.
Disconnect and connect the USB mem-
ory.
21
F i l e s N o t F o u n d
2 1
No Firmware File in USB after SBL
Mode.
Disconnect and connect the USB mem-
ory.
22
N o t M a t c h F i r m
2 2
Firmware File in USB after SBL
Mode for unsupported Model
name/area.
Check the supported Model name/area
for the Firmware File.
23
C o n n e c t i o n f a i l
2 3
Failed to obtain entire Firmware
information after SBL Mode.
Disconnect and connect the USB mem-
ory.
24
C o n n e c t i o n f a i l
2 4
Time Out while obtaining entire
Firmware information after SBL
Mode.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
25
C o n n e c t i o n f a i l
2 5
Failed to transit to SBL Mode.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
26
D o w n l o a d f a i l
2 6
Time Out in Download (writing to
SDRAM) for Firmware Download.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
27
C o n n e c t i o n f a i l
2 7
Failed to write to EEPROM after
SBL Mode.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
36
M a i n * * * m i n
C o n n e c t i o n F a i l 3 6
Unable to detect USB.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
37
M a i n * * * m i n
F i l e s N o t F o u n d 3 7
No Firmware File in USB.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
38
M a i n * * * m i n
N o t M a t c h F i r m 3 8
Firmware File in USB for unsup-
ported Model name/area.
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error dis-
play, press and hold the "Power opera-
tion" button for ve seconds.
85