Denon AVR-X4100W Service Manual

2.3. About the error code
See the following table for details on the error code, details of the error code, display and coping strategies when updat-
ing the rmware from DPMS. (Denon Product Management Server)
Error
Code
DPMS Update Error Display Details of Error code Coping strategies
01
L o g i n f a i l e d
0 1
Failed to log in to DPMS.
Initialize the unit and try updating
again.
Update in an environment where there
is a small network load.
02
S e r v e r i s b u s y
0 2
Line etc. is congested when log-
ging in to DPMS.
Update in an environment where there
is a small network load.
03
C o n n e c t i o n f a i l
0 3
Connection to DPMS failed.
Check the network connection. Update
in an environment where there is a
small network load.
04
C o n n e c t i o n f a i l
0 4
Failed to obtain entire Firmware
information.
Check the network connection. Update
in an environment where there is a
small network load.
05
C o n n e c t i o n f a i l
0 5
Time Out while obtaining entire
Firmware information.
Check the network connection. Update
in an environment where there is a
small network load.
06
C o n n e c t i o n f a i l
0 6
Failed to obtain individual Firm-
ware information.
Check the network connection. Update
in an environment where there is a
small network load.
07
C o n n e c t i o n f a i l
0 7
Time Out while obtaining individ-
ual Firmware information.
Check the network connection. Update
in an environment where there is a
small network load.
08
C o n n e c t i o n f a i l
0 8
Error notication received while
requesting Firmware Info.
Check the network connection. Update
in an environment where there is a
small network load.
09
C o n n e c t i o n f a i l
0 9
Time Out while obtaining Firm-
ware information.
Check the network connection. Update
in an environment where there is a
small network load.
0A
D o w n l o a d f a i l
0 A
Error(NG) notication received
while requesting Firmware Down-
load.
Check the network connection. Update
in an environment where there is a
small network load.
0B
D o w n l o a d f a i l
0 B
Error(Server Busy) notication re-
ceived while requesting Firmware
Download.
Check the network connection. Update
in an environment where there is a
small network load.
0C
D o w n l o a d f a i l
0 C
Error(Connect failure) notication
received while requesting Firm-
ware Download.
Check the network connection. Update
in an environment where there is a
small network load.
0D
C o n n e c t i o n f a i l
0 D
Received value with invalid Pack-
age Version.
Check the network connection. Update
in an environment where there is a
small network load.
0E
C o n n e c t i o n f a i l
0 E
Connection to DPMS failed.
(Cannot get NTP)
Check the network connection. Update
in an environment where there is a
small network load.
10
M a i n * * * m i n
U p d a t i n g f a i l 1 0
No Update Packet received from
CX870 / CY920 (Time Out).
Turn on the power again. Update will
start automatically.
11
M a i n * * * m i n
U p d a t i n g f a i l 1 1
Abnormal data in Update Packet
received from CX870 / CY920
(CRCError).
Turn on the power again. Update will
start automatically.
91

Denon AVR-X4100W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out connectivity	Yes
Audio output channels	- channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
3D	-
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	12600 g