Denon DBP-4010UD - Language and HDMI Setup; Language Setup Details; HDMI Setup Details

TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Speci cations
ENGLISH
2
Setting items
Setting contents
Dialog
Set the dialog used to play
BDs or DVDs.
Original : Plays the dialog selected at the top in the language menu
stored in the disc.
English/French/Spanish/German/Japanese/Italian/Swedish/Dutch/
Russian/Chinese/Korean/Danish/Finnish/Norwegian/Icelandic/
Hungarian/Romanian/Turkish/Greek/Irish/Portuguese/Polish/Czech/
Slovak/Bulgarian
Others : Enter the language code.
Subtitle
Set the subtitle language
used to play BDs or DVDs.
Off : Do not display subtitles.
English/French/Spanish/German/Japanese/Italian/Swedish/Dutch/
Russian/Chinese/Korean/Danish/Finnish/Norwegian/Icelandic/
Hungarian/Romanian/Turkish/Greek/Irish/Portuguese/Polish/Czech/
Slovak/Bulgarian
Others : Enter the language code.
Disc Menus
Set the language used for
BD or DVD menus.
English/French/Spanish/German/Japanese/Italian/Swedish/Dutch/
Russian/Chinese/Korean/Danish/Finnish/Norwegian/Icelandic/
Hungarian/Romanian/Turkish/Greek/Irish/Portuguese/Polish/Czech/
Slovak/Bulgarian
Others : Enter the language code.
GUI Language
Set the GUI language.
English/Français/Español/Deutsch/Italiano/Svenska/Nederlands/
NOTE
The setting may not be active depending on the disc.
If “Other” is selected for “Dialog”, “Subtitle” or “Disc Menus”, refer to “Language Code List” (vpage
51), use number buttons ~ to input the language code, then press to set.
Setting items
Setting contents
Auto Format
Set the content of HDMI
video output resolution item
“Auto” (vpage 14) with
.
Max Res. : Output data using the maximum resolution that can be
handled by the connected TV.
Panel Res. : Output data using the maximum resolution of the panel of
the connected TV.
If the TV does not support 1080P24, video is output in 1080P format.
I/P Direct
Set whether the I/P converter
converts 24P frames.
Off : Convert 1080 progressive 24 frames to 60 frames.
On : Output 1080 progressive 24 frames without conversion.
NOTE
When “I/P Direct” is set to “On”, when playing some discs no video
signals are output from the video and S-Video terminals.
Color Space
Set the video signal system
to be output from HDMI.
YCbCr : Output by YCbCr video format.
RGB Normal : Output using the RGB video system (16 (black) to 235
(white)).
RGB Enhanced : Output using the RGB video system (0 (black) to 255
(white)).
Deep Color
Set the HDMI terminal to
output Deep Color.
Expands the color depth
(number of used colors)
of the HDMI video signal,
enabling playback with more
natural colors and free of
streaking.
Auto : Deep Color is automatically output when the connected HDMI
device supports Deep Color.
Off : Do not output Deep Color.
Audio Setup
Set the audio signal system
to be output from HDMI.
GAutoH : Automatically selects and outputs signals that can be input to
the connected HDMI device. The bitstream signal takes priority.
GMulti LPCM BM OnH : Decoded Linear PCM multi-channel signal is
output by the DBP-4010UD. Speaker setting is enabled. (BM: Bass
Management)
For setting, on the GUI menu, refer to, “Audio Setup” – “7.1ch Audio Out”
(vpage 25, 26).
Speaker Con guration : Set the speaker con guration used for
playback. Automatically sets channel components and characteristics
according to setting.
Channel Level : Set the volume of the test tone to be the same when it
is output from each speaker.
Distance : Set the distance between the listening position and each
speaker.
•
•
•
Set the language used for playback dialogs, subtitles, and menus. Set the HDMI output signal or HDMI control function.
Language Setup
Default settings are underlined.
HDMI Setup
Default settings are underlined.
Remote control operation
buttons
:
Displaying the menu
Cancel the menu
:
Moves the cursor
(Up/Down/Left/Right)
:Decision the setting :Return to previous menu
Setup
See overleaf