A-B Repeat Playback (A-B Repeat)
Repeat playback is performed between the set A and B point during
playback.
1
Press A-B during playback.
Set the repeat start point (A point).
2
Press A-B to set the repeat end point.
Set the repeat end point (B point), and repeat playback
continues between A and B points.
3
Press A-B again to exit repeat playback.
n Return to the start position of a track during
playback
Rotate the jog dial counterclockwise during playback.
Playback returns to the track start position, and playback starts again.
Rotating the jog dial within 1 second of the beginning of the track
moves back to the previous track.
Operations during playback
Playback pitch adjustment (Pitch control)
The playback speed can be adjusted within a range of –16 % to +16
%.
By adjusting the pitch, you can listen to recordings over a shorter time
span, or listen more slowly.
1
Press PITCH while holding down SHIFT during
playback, cue or when stopped.
A pop up is displayed and the pitch adjustment is enabled.
2
Press PITCH + or PITCH – while holding down
SHIFT.
• The pitch changes by 0.1 % each time the button is pressed.
• Press and hold the button to change the pitch continuously.
• To cancel the pitch control, press PITCH again while holding down
the SHIFT button.
• Hold down the SHIFT button and pressed PITCH+ and PITCH-
button, reset the pitch value.
n Changing the playback speed without changing
the musical interval
(Master Key)
When the playback speed is adjusted using the pitch control, the
musical interval changes according to the playback speed. With the
Master Key function on, you can play back music without changing
the musical interval even when you change the pitch.
• The Master Key setting is performed in“Master Key”
(vpage16) in the preset menu.
• If “Master Key” in the menu is set to “On”, the master key mark
appears in the display when the pitch is adjusted.
To Next Page
Loading...
