Denon DN-501C

18
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
18
Setting Defaults
Setting Defaults
Menu Operations (Utility)
ON/STANDBY MENU
2
Jog Dial/
ENTER
BACK
n Load Setting
Reads the setting file stored in the root of the USB media device and changes the DN-501C's settings
1
Press ON/STANDBY.
The power of DN-501C is switched ON, and the display screen lights.
2
While DN-501C is stopped, press MENU.
The menu list is displayed.
3
Rotate the jog dial to select “06 Utility”, and press the jog dial.
4
Rotate the jog dial to select “01 Load Setting”, and press the jog dial.
A pop up is displayed.
5
Select “OK” and press the jog dial.
The file (DN-501C.ini) saved in the USB media device is read, and the DN-501C settings are changed.
n Save Setting
The current settings are saved to the root of the USB media device
1
Press ON/STANDBY.
The power of DN-501C is switched ON, and the display screen lights.
2
While DN-501C is stopped, press MENU.
The menu list is displayed.
3
Rotate the jog dial to select “06 Utility”, and press the jog dial.
4
Rotate the jog dial to select “02 Save setting”, and press the jog dial.
A pop up is displayed.
5
Select “OK” and press the jog dial.
The file (DN-501C.ini) is written to the root of the USB memory stick.
n Firmware Version
Displays the firmware version of the DN-501C.
1
Press ON/STANDBY.
The power of DN-501C is switched ON, and the display screen lights.
2
While DN-501C is stopped, press MENU.
The menu list is displayed.
3
Rotate the jog dial to select “06 Utility”, and press the jog dial.
4
Rotate the jog dial to select “03 Firmware Version”, and press the jog dial.
Displays the firmware version of the DN-501C.
• Press either the
Back or STOP button to return.
Downloaded From Disc-Player.com Denon Manuals