Denon DN-501C

38
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
38
Control function
Extended Communication Format (MIDI)
n Controlling the DN-501C externally
DN-501C
Host device
Control
Command
Control commands are commands such as play, stop etc. sent from
the controller to control the DN-501C.
n Status information output for external status
request commands
DN-501C
Host device
Status Information
Command
Status Request
Command
The status request command is a command used to obtain status
information from the DN-501C. When the DN-501C receives a status
request command, it uses a status information command to notify its
status.
Serial remote control function
n Automatic output of status information when the
DN-501C status changes
DN-501C
Host device
Status
Command
The status notification command is automatically generated when the
DN-501C changes status. The status notification uses an information
command to notify the host of the status.
Downloaded From Disc-Player.com Denon Manuals