Denon DN-501C

32
Getting started
Part names
and functions
Connections Control functionSetting Defaults
File and folder
settings
Playback Information
32
Control function
Various playback functions with RC-F400S
Hot Start list display
HOT START LIST
EXIT
STORE
NEXT
PAGE
PAGE 1
\ MPGLANG \ abcdefg.MP3
\ MPGLANG \ Honey01.MP3
\ MPGLANG \ abcdefg0.MP3
\ MPGLANG \ abcdefg7.MP3
03
\ MPGLANG \ abcdefg1.MP3 04
\ MPGLANG \ abcdefg3.MP3 06
\ MPGLANG \ abcdefg4.MP3 07
\ MPGLANG \ abcdefg6.MP3
09
\ MPGLANG \ abcdefg5.MP3
10
02
01
08
FILE
LIST
\ MPGLANG \ abcdefg2.MP3 05
q
e
w
r
t
y
u
q Title display
Displays “HOT START LIST”.
w PAGE display
Displays the page.
e Hot Start list
Displays the set file name.
The ♪ mark is displayed for the file that is being played back.
r EXIT button
Enters the main mode.
t FILE LIST button
Moves to the file list.
y STORE button
When the media is set to USB, the set Hot Start list is saved as
a file.
The PPL file is saved in the root directory.
• A PPL file is the file that saves the content of a Hot Start list.
u NEXT PAGE/PREV PAGE buttons
Display the list in the next/previous page.
Connection
As shown below, connect the RS-232C port on DN-501C to the
RS-232C port on RC-F400S using the straight cable that is supplied
with RC-F400S.
• Once they are connected, turn the power switch on for the
respective devices.
• Configure the following items in the DN-501C “System Setting”.
• Serial bit Rate: 38400
• Serial Protocol: RC
• After connection, fix the cable by turning the cable terminal screws.
DC IN 5V
POWER
RS232C
OFF
ON
RC-F400S
DN-501C
RS-232C Straight cable
Notes on connecting the AC adapter
• Always turn the power switch off before connecting/
disconnecting the AC adapter.
• Do not touch the AC adapter with wet hands.
• When disconnecting the AC adapter, make sure that you hold the
plug. Pulling or bending the cord may damage the cord or cause
electric shock or fire.
Downloaded From Disc-Player.com Denon Manuals