Setting Defaults
Menu Operations (Preset Settings/System Settings)
ON/STANDBY MENU
2
Jog Dial/
ENTER
BACK
1
Press ON/STANDBY.
The power of DN-501C is switched ON, and the display screen lights.
2
While DN-501C is stopped or in cue, press MENU.
The menu list is displayed.
• For details on the setting items in each menu, see “Menu List” (vpage14).
3
Rotate the jog dial to select the setting item that you want to change, and press the
jog dial.
The menu list of the selected item is displayed.
4
Select the setting item that you want to change, and press the jog dial.
The setting item is chosen.
• To continue to set other items, perform the operation in step 3 again.
• To return to the upper level menu from the menu item currently being set, press
BACK.
5
After you nish all settings, press MENU.
The changed settings are saved, and DN-501C returns to the stopped status.
To cancel the settings, press 2.
n Saving menu settings to USB memory
The DN-501C has a function for saving menu settings to USB media. This function is useful for sharing
the same settings from one DN-501C on multiple DN-501C units.
For details on the operations, see the separate “Save Setting” (vpage18).
n Preset Setting
Item Setting Details (Items in bold are factory default)
Shift Mode
Sets operations for the
SHIFT button.
Momentary: Shift mode can be operated while pressing and holding the
SHIFT
button.
Lock: Shift mode will hold when the SHIFT button is pressed and released. The
SHIFT button will light when in Shift mode.
Power On
Sets the operation
when the DN-501C
power is switched on.
Stop: A track is not played back when the power is switched on.
Resume Play: Start playback from the track that was played last by the previous
operation.
Play First: Start playback at track #1 of the last folder or disc that you played
back during the previous operation.
NOTE
If the media that was previously being played back is removed while the unit
power is off, when the power is turned on again CD is selected in the stopped
status.
Play Range
Sets the track playback
range.
All: Plays back all of of the tracks in all folders.
Folder: Plays back all of of the tracks in the selected folder.
Play Mode
Sets the track playback
mode.
Continuous: Plays back all tracks within the “Play Range” setting continually.
Single: Plays back only 1 track.
Random
Sets random playback.
On: Plays back tracks at random.
Off: Random playback is not performed.
Program
Sets programmed
playback.
On: Plays back tracks in the set order (programmed playback).
Off: Programmed playback is not performed.
Finish Mode
Sets the operation
when playback is
stopped.
Stop: Playback is stopped at the start of the folder or disc.
Next: When playback is stopped, the start of the following track is cued.
Recue: Playback stops and returns to the cue point.
Repeat
Sets repeat playback.
On: Performs repeat playback according to the “Play Mode” settings.
Off: Repeat playback is not performed.
Auto Cue Off: Does not function.
–48 dB: After a track has been selected, playback is cued at the point where the
volume level is less than –48 dB.
–42 dB: After a track has been selected, playback is cued at the point where the
volume level is less than –42 dB.
–36 dB: After a track has been selected, playback is cued at the point where the
volume level is less than –36 dB.
To Next Page
Loading...
