Setting Defaults
n System Setting
Item Setting Details (Items in bold are factory default)
Mono Off: Channel output based on the audio source.
On: Summed monaural output.
Output Rate
Sets the sampling
frequency for digital
output.
Auto: Audio output based on the rate of the input media or file.
44.1 k: Audio output at 44.1 kHz.
48 k: Audio output at 48 kHz.
Auto Sleep
Sets the time that
rotation of the disc
stop.
Off: Does not function.
30 sec: Switches to sleep mode if there are no operations for 30 seconds.
10 min: Switches to sleep mode if there are no operations for 10 minutes.
20 min: Switches to sleep mode if there are no operations for 20 minutes.
30 min: Switches to sleep mode if there are no operations for 30 minutes.
Volume Output Fixed (0dB): Prohibits the output level from being adjusted and fixes it as 0dB.
Variable: Output level can be adjusted.
For details on the operations, see the separate “Changing the output level”
(vpage26).
Ref (XLR/RCA)
Output level of the
analog output can be
changed.
+24 dBu/+10 dBV: XLR=+24 dBu / RCA=+10 dBV
+20 dBu/+6 dBV: XLR=+20 dBu / RCA=+6 dBV
+18 dBu/+4 dBV: XLR=+18 dBu / RCA=+4 dBV
+6 dBV/+6 dBV: XLR=+6 dBV / RCA=+6 dBV
Trim L
+2.0 dB -
0
- –2.0 dB:
Adjusts the left channel in 0.1 dB steps. Initial value is “0 dB”.
Trim R
+2.0 dB -
0
- –2.0 dB
:
Adjusts the right channel in 0.1 dB steps. Initial value is “0 dB”.
Display Contrast 1
-
5: 1 is the darkest, 5 is the brightest. Initial value is “5”.
IR Remote On: Receives IR remote commands.
Off: Does not receive IR remote commands.
Serial Bit Rate
Sets the RS-232C bit
rate.
9600: 9600 bps
38400: 38400 bps
Serial Protocol MIDI: Conforms to MIDI controls.
RC: Conforms to D&M RC protocol.
Password ****: Sets a password (6 to 12 characters) for system settings. Displayed as
“****” when set.
Default value is “No password (NULL)”.
Default Resets all of the system settings to the defaults.
To Next Page
Loading...
