ENGLISH
5.
Updating
to
the DVD-A1UDCI's Latest Software Version
-M·na
• It
is
necessary to subscribe to
an
ISP
in order
to
connect to the Internet. If you already have a
broadband connection, there
is
no need
to
subscribe anew.
• The router you can use varies with the
ISP.
For more information, contact your
ISP
or
PC
dealer.
• DENON assumes
no
responsibility whatsoever for any communication errors or troubles resulting
from
customer's network environment or connected devices.
System Requirement
For
Internet connection, use
an
ISP
(Internet Service Provider). Ask your local dealer
for
details.
o Internet Connection by Broadband Circuit
o
Modem
Device that connects to the broadband circuit and conducts communications on the Internet.
A type that
is
integrated with a router
is
also available.
o Router
When using the DVD-A1
UDCI,
we
recommend a router with the following features.
• Built-in DHCP (Dynamic Host Configuration Protocol) server.
Function that automatically assigns
an
IP
address on the
LAN.
• Built-in 1
OOBASE-TX
switch (built-in switching hub compatible with speeds upwards
of
100
Mbps)
o Ethernet cable (CAT-5 or greater recommended)
• An Ethernet cable is not included with the DVD-A1UDCI.
•
For
Ethernet cable,
we
recommend you use shielded straight cable (normal type).
If
you use the flat type or a non-shielded cable, the noise may adversely affect other devices.
o Others
• The DVD-A1UDCI can use the DHCP function to automatically set the network.
•
With
the type
of
circuit in which network setting is performed manually, when subscribed to a provider,
conduct
the setting in accordance with
"Network
Setup" on the
GUI
menu (t:1r'page 31).
·If
you connect the DVD-A1
UDCI
to
a network
without
a DHCP function, conduct
IP
address and other
settings according to "Network Setup" on the
GUI
menu
(~page
31).
• The DVD-A1UDCI does not support
PPPoE.
If you subscribe
to
a circuit that
is
set
with
PPPoE,
a PPPoE-
compatible router
is
required.
• When setting manually, check the setting contents
with
the
network administrator.
~
~
LAN
port/
Ethernet
connector
ETHERNET
connector
Modem
I:::JJ
C'=-Il--To-W-A-N"port
I:J
C
1
:::-,
~----"
I:J
L:J_li_o_LA_N....:..po_rt
__
I:J
To
LAN
port
IDJ
Internet
Router
•
You
can update by downloading the latest firmware from the Internet.
For
more information, on the
GUI
menu, select "Other Setup" - "Firmware Update"
(~page
33).
• See "Network Setup"
(@'page
31) on the
GUI
menu for more information on network setting.
Connecting to the Network
I
21
To Next Page
Loading...
