ENGLISH
Other Setup
Various
Settin
s
Vertical
Stretch
Off
M,x
Audio
Output
Frle
filter
All
I
Setting items
Initialize
All settings including audio
mode and picture quality
are
default settings.
Firmware Update
Update the firmware
of
the
unit via
the
Internet.
Setting
contents
Cancel: Do not initialize.
OK
: Execute initialization.
Check for Update : Check if the latest firmware exists.
You
can
also
check approximately
how
long it will take to complete
an
update.
Start:
Starts firmware update.
When updating starts, the power indicator lights red and the
GUI
screen
is
shut down.
During update, a rough remaining time
is
indicated on the display.
When updating
is
complete the power indicator lights green and normal
status is resumed.
You
can set the audio mode and change playback files.
You
can set various modes during playback, The setting menu
is
displayed at the top of
the
screen.
1
Press(~).
Displays the currently settable menu.
*The display content changes depending on the media being played back.
----_._-~"---~
-'-
--
_._~----
.-
---_._-
--
2 Select the setting item using
<::V
<:::0,
and then press 8 or
8·
3 Use <::V
<:::0
to
select a setting and use 8 to change the setting.
Setting the Audio Mode Default settingumumderlined.
Information
Displays the license for
the
IPA
font
used by this
product.
(Font License)
Japanese (Original) : Displays
in
Japanese.
The font used
in
this product's
GUI
menu screen conforms to
IPA
font specifications.
See
the following URL for the
IPA
font license
agreement.
http://ipafont.
ipa
.go.jp/enduser license.html
Setting items
Setting
contents
Cautions on "Firmware Update"
-
In
order to use these functions, you
must
have the correct system requirements and settings for a
broadband Internet connection
(Gr'page
21,31).
- Do not turn
off
the power until updating
is
completed.
-Information
regarding the "Firmware Update" function will be announced on the DENON web site
each
time
related plans are defined.
- Even with a broadband connection to the Internet, approximately 1 hour
is
required for the updating
procedure to be completed.
Once updating starts, normal operations on the DVD-A1
UDCI
cannot be performed until updating
is
completed. Also, setting items
of
the
GUI
menu of DVD-A 1
UDCI
or setting items
of
the image
adjustment may be initialized.
BD
Audio
Mode
Switch
BD
audio playback
mode.
Surround
Mode
Converts a 2-channel source,
etc.
to
output
multi-channel
surround audio.
HD
Audio
Output:
Can
view by outputting high quality signals such
as
Dolby TrueHD, Dolby Digital Plus, or DTS-HD
as
its high sound quality
bitstream. Cannot listen to interactive or secondary audio.
Mix Audio
Output:
Outputs a mix of primary audio/interactive audio/
secondary audio.
#'
In
the case of Dolby TrueHD, Dolby Digital Plus and DTS-HD audio
playback, set to "HD Audio Output".
t~[tUa
When
"Mix
Audio Output"
is
set and DTS-HD audio signals are played,
only the
DTS
digital surround stream of the DTS-HD audio stream is
decoded
and
output.
J:!.i.rru
:
Do
not apply surround processing and output audio
as
is.
DOLBY
PLllx
(or
PLll)
: Apply DOLBY PLllx (or PLll) surround processing
and output the signal.
DTS NEO:6 : Apply
DTS
NEO:6 surround processing and
output
the
signal.
tNtna
• This setting
is
valid when "Audio Setup" -
"7.1
ch
Audio Out" on the
GUI
menu
is
set to
"Multi
Channel" and when "HDMI Setup" - "Audio Setup"
on the
GUI
menu
is
set to
"Multi
LPCM BM On"
(Gr'page
25).
- This setting
is
invalid when 'Audio Setup" - "Source Direct"
on
the
GUI
menu
is
set to "On"
(Gr'page
29),
and when "DENON
LINK
Setup" -
"DENON LINK
Mode"
is
set to anything other than
"Off"
(Gr'page
30).
33
Remote control operation
buttons
SETUP
(0
.Displaying the menu
'Cancel the menu
.Moves the cursor
'(Up/Down/Left/Right)
8
:Decision the setting
RETURN
o
:Return to previous menu
To Next Page
Loading...
