ENGLI!S
H
Set display-related items,
Setting items
Setting contents
Setting items
Setting contents
Screen Saver
Set the screensaver.
Wallpaper
Settodisplaythe background
while playback
is
stopping.
Still Mode
Set image quality during
pause.
Slide Show Time
Sets the display time
of
JPEG
files.
Temporary Display
When the display
is
set to
"Off"
by the Dimmer Control
(12ir' page 49) or
Pure
Direct
Function
(o::1r'page
40).
this
sets it
to
temporarily display
operations received.
Captions
This setting output asubtitles
signal to a closed caption
decoder (sold separately).
Off :
Do
not use the screensaver.
On
: The screensaver function activates when stop or pause status
continues for about three minutes.
fktJ.u:e : Displays the DENON logo.
Black: Set the background to black.
Gray;
Set the background to
gray.
Blue: Set the background to blue.
Automatic:
Display automatically using "Field" or "Frame" per the still
image information.
Field: Set when there is a blurred image when 'Automatic" image display
is
set.
Frame; Set to display non moving images
in
high resolution.
3 -
.5
- 100sec : This sets the display time per frame of a
JPEG
file during
slideshow playback
Off :
Do
not temporarily display operations.
On
: Temporarily display operations.
Off
:
Do
not output the closed caption (subtitle) signal.
On
: Output the closed caption (subtitle) signal.
Auto Power Mode
This setting automatically
sets the power
to
standby.
Power Saving
Set power saving mode
during standby
Remote Control Setting
(Main unit side)
Set the remote control.
BD
Data Utility
Erases data
on
SD
Memory
Card. and initializes cards.
Off :
Do
not use auto power mode.
On
: This setting automatically sets the power
to
standby if any of
the
following states continues for approximately
30
minutes.
• Disc not loaded
• Playback
has
stopped
• Stopped due to resume function
power Saving
Standby:
This
is
the lowest power consumption mode.
During standby. operations are not accepted
via
HDMI control
or
RS-
232C
Normal Standby : This
is
the
low
power consumption mode. During
standby. operations are accepted
via
RS-232C
but not accepted by
HD
I
control.
HDMI Control
Mode:
Setting for turning the power
on
using
an
external
device's HDMI control function or by operation
via
RS-232C. SlightlV
higher power consumption.
Quick Start
Mode:
Start up time
is
faster but power consumption during
standby
is
higher.
[Remote ID]
Switches the DVD-A1UDCl's remote
controllD
code when other
DE
NO
BD
Players are
in
the vicinity.
• DENON 1 : Set the switch
in
the remote control battery compartment
to
''1''
as
well ("Remote Control Settings (Remote Control Side)"
o::1r'
page
7).
• DENON 2 : Set the switch
in
the remote control battery compartment
to
"2"
as
well ("Remote Control Settings (Remote Control Side)"
o::1r'page
7).
[Receive Legacy Remocon]
Set whether or not
to
accept remote control signals
of
a DENON
DVD
player or other device.
•
On:
Accept
• Off :
Do
not accept
BD
Data Erase ; Erases both internal memory and
SO
Memory
Card
storage.
Initialize
SD
Card:
Initializes the
SD
card to
be
used
for
the Bonus View
function.
-N,na
• Insert or remove a
SO
Memory
Card
while the power
is
in
standby
If you insert a
SO
Memory
Card
while the power is
ON.
the
SO
Memory
Card
may not
be
read.
• The
SO
card used for the Bonus View function must have a capacitv
of 1
GB
or greater. Also the
SO
card must
be
initialized
on
the
OVD-
A1UOCI.
• This operation will delete all the data.
Do
not perform this operation
when
an
SO
card containing MP3 or
JPEG
data
is
inserted.
I
.J
;;;
Remote control operation
buttons
.Displaying the menu
'Cancel the menu
.Moves the cursor
'(Up/Down/Left/Right)
e :Decision the setting
RETURN
o
:Return to previous menu
32
To Next Page
Loading...
