ENGLISH
Troubleshootin
I
If
a
problem
should
arise,
first
check
the
following:
1. Are
the
connections
correct?
2. Is
the
set
being
operated
as
described
in
the
owner's
manual?
3. Are
the
other
components
operating
properly?
If this unit does not operate properly. check the items listed in the table below. Should the problem
persist. there may be a malfunction.
In
this case. disconnect the
power
immediately and contact your store
of
purchase.
I
I
Symptom
I
Cause /
Countermeasure
Page
Power does not turn • Check if the power cord
is
properly connected.
22
on. • Plug the power supply cord into the
power
outlet.
-
• The safety protection device may be activated. Unplug the power
-
cord once, and wait for 5-10 seconds and then plug it
in
again.
• DVD-A1
UDCI
enters the standby status by safety function when
3,
9
the fan stops. Check the back of the set if something
is
disturbing
the fan rotation.
Unable to play back • Does the
SD
Memory
Card
has
more than 1
GB
of available space?
4,38
bonus view. • Has the
SD
Memory
Card
been initialized by the DVD-A 1
UDCI7
• Was the
SD
Memory
Card
inserted while the power of the unit
is
32
on. (Insert the
SD
Memory
Card
while the DVD-A1
UDCI
is
in
the
4,
38
standby
status)
Picture
does
not • Switch the TV's input setting to the external input connected to
-
appear. the player.
o
Is
the Pure Direct function set to "On"? Set to "Off".
30,
40
Also,
is
"Pure Direct Setup" - "Video Out" on the
GUI
menu set
to
"Off"
at the "User Preset 1" or "User Preset
2"
setting? Set it
to "On".
oCheck the connection of the video/S-Video/component video cable.
19
oDoes the "Video Setup" - "Component Resolution" setting
on
the
GUI
menu match the connected device's resolution? Set it so that
26
it matches.
Video and audio are
oCheck the connection of the HDMI cable.
13,14
not output with HDMI
o
Is
the
"HDMI"
indicator of the display of the DVD-A1
UDCI
8
connection.
lighting?
30,
40
ols the
Pure
Direct function set to "On"? Set to "Off".
Also,
is
"Pure Direct Setup" - "Video Out" on the
GUI
menu set
to
"Off"
at the "User Preset 1" or "User Preset 2" setting? Set it
to
"On".
16
oCheck whether the connected display device or other device
supports HDCP This unit will not output a video signal unless the
other device supports HDCP
See
the owner's manual of your
TV,
AV
Amp, etc.
15
oCheck that the setting of the HDMI video resolution supports the
resolution
of
the connected device. When set to "Auto", DVD-
A1
UDCI
makes the setting automatically.
13,14
oCheck that the HDMI
mode setting matches the connected
content. The connection method of each HDMI mode
is
different.
55
Symptom
I
Cause /
Countermeasure
I
Page
HD
audio
is
not
oSet "BD Audio
Mode"
to "HD Audio Output". 33
output.
Picture
is
not
oThe picture may be slightly disturbed directly after fast-forwarding
-
displayed or
is
or reversing. This
is
not a malfunction.
disturbed.
oConnect
the
DVD-A1UDCI's video/S-Video/component
video
19
Picture of a BD-Video output either directly to the
TV
or to the
TV
via
the
AV
Amp.
Do
or DVD-Video disc
is
not connect via a
VCR
(video cassette recorder). Some discs
in black and white.
include copy prohibit signals,
and
when such discs are played
via
a
VCR,
the copy guard system may cause the picture to
be
disturbed.
o
Is
a disc that
is
not compatible with the player or a disc with 3
a different region number loaded? (This player supports region
code
''/>:'
for BD-Video discs, "1" or "ALt:' for DVD-Video
discs)
No sound
is
heard or
oCheck the devices whose audio
is
connected and the speaker
11
-
22
the sound
is
hard to connections.
hear.
ols the power
of
devices whose audio
is
connected turned
on?
-
Is
the input selection set to the input to which the DVD-A1
UDCI
is
connected?
o
Is
the audio
output
properly selected?
13 -
21
Picture freezes oWhen the disc
is
scratched or contaminated with fingerprints, the 6
momentarily during disc may not be played back correctly.
Clean the disc or replace
playback.
with a non-scratched disc.
oThere may be a problem
with
the data recorded on the disc.
-
Playback does not
o
Is
there condensation inside the player or on the disc? (Let set for 3
start even when
..
is
1 to 2 hours
with
the power off.)
pressed, or starts but oWhen the disc
is
scratched or contaminated with fingerprints, the 6
stops immediately. disc may not be played back correctly.
Clean the disc or replace
with a non-scratched disc.
ols the disc loaded upside-down?
Load
the disc properly, with the
6
side containing the signals to be played facing down.
•
Is
an
unplayable disc loaded?
3,
4
Subtitles are not • Subtitles cannot be displayed for BD-Video, DVD-Video or DivX®
48
displayed. files that do not contain subtitles.
o
Is
the subtitle setting "OW? Use a disc menu or to set the
00
25
displayed subtitle.
SD
Memory
Card
• The format
of
the card does not match
to
this unit or the card
is
32
cannot be read. not compatible.
o
Is
the playback media
mode
set to "SD
CARD
MODE"?
36
Select "SD CARD MODE" at
(~)
To Next Page
Loading...
