Symptom
I
Cause / Countermeasure
I
Page
No
return to start-up
• There may be
an
internal
error.
Set the power to standby, wait
-
screen when disc is
awhile, then turn the power back
on.
removed.
The
set cannot be
• Aim the remote control directly at infrared sensor window
on
the 7
operated with the
front of the
unit
remote control unit.
• Operate within a distance of 7 meters from the remote control 7
sensor.
• Remove the obstacle.
-
• Replace the batteries with new ones.
7
• Insert the batteries
in
the proper direction, checking the
Ef>
and
7
e marks.
• Make the signal code of the remote control match to the signal
7
code of the unit.
The
unit
is
operated • The unit
is
operated by the remote control of other
DENON
7,32
by
the remote control products.
of
other
DENON
•
To
avoid the unit being operated with the remote control of other
32
products.
devices, set "Other Setup" - "Remote Control Setting" - "Receive
Legacy Remocon" to "Off"
on
the
GUI
menu.
Buttons do not work • Operations may not
be
permitted by the disc.
-
or
the unit stops
• The safety protection device may be activated. Unplug the power
-
responding.
cord once,
and
wait for
5-10
seconds
and
then plug it
in
again.
• Refer to the instructions of the disc.
-
Playable disc
is
not •
The
pickup lens may be dirty. Before requesting servicing, try
-
read.
cleaning the laser pickup with a commercially available lens
cleaner. (Do not use a cleaner with brush because it may damage
the lens.)
Angle
does
not • If a SD-Video or DVD-Video does not record multiple angles,
49
switch. angle cannot
be
switched. Also, multiple angles may
be
recorded
for specific scenes.
Playback
does
not • Playback may
be
prohibited by the viewing restriction setting.
31
start when the title
is
Check the "Ratings" setting
on
the
GUI
menu.
selected.
The
password for
•
On
the
GUI
menu, perform the "Other Setup"
- "Initialize"
33
rating level
has
been procedure.
forgotten.
• Some function may not
be
used
in
some operation status
and
this is not failure of the unit.
Read
the
description
in
this Owner's Manual for details on correct operations.
•
The
volume may differ from disc to disc. This
is
due to the differences
in
how the signals
are
recorded
on
the disc,
and
is not a malfunction.
• During programmed playback, it
is
not possible to perform random playback or to start playback from
the desired track or file
• Some functions are prohibited
on
some discs.
ENGLISH
56
To Next Page
Loading...
