Denon DVD-A1UDCI - Playing Back in Your Preferred Order (Program Playback); Switching Audio

ENGLISH
Operations Enabled During P1ayba ~ .' ~
I
Playing Back in Your Preferred Order
(Program Playback)
You can program up to a maximum of 20 tracks.
1
Press (~l during stop.
The "PROG" indicator lights on the display. and the program
setting screen appears.
o Erasing Programmed Tracks One by One
Press (~l during stop.
o Erasing All Programmed Contents
Press b~~'M.
Switching Audio
III miD Bill. mmI DivX I
With discs and files that have multiple audio track recording, you
can change
the audio during playback.
With BD, you can set sub-track audio such as interactive audio and
commentary audio, etc.,
with "Secondary".
Switching a BO's Primary Audio/Secondary Audio
1
During playback of an Primary Audio/Secondary
Audio title, press 8.
The audio number currently being played is displayed.
3 Select your desired audio language with <:;I:) <:::I:>.
4
Press 8.
The setup screen disappears.
• Depending on the disc. audio switching may be restricted
to
operation of the disc menu. In this case, switch the audio on the
disc menu.
• Be sure
to set "BD Audio Mode" to "Mix Audio Output" InTpage
33) for playing back secondary audio.
• Depending on the
BD, even if picture-in-picture playback is set to
"Off", Secondary Audio only may be output.
• ~&':. ... ,
AudIO
~ 1/5 Dolby Digital 3/21 English
Secondary -/1 Off
*If multiple audio items are recorded, "the current
audio number/number
of recorded audio items"
is displayed.
*When "BD Audio Mode" is set to "HD Audio
Output" (nTpage 33). "Secondary" audio is not
output.
. .
AudIO
• ~ 1/5 Dolby Digital 3'21 English
Secondary -/1 Off
2
Press <:;I:) <:::I:>, select "Primary" or
"Secondary", and then press 8 .
000@ID
000
0008
800B
. Decision entry
0-0.@···· .... · .. ··..··.. ··· .. ···················Entry
8· .. ·············· .. · .. · .. · .. ·
2
Enter the track numbers you want
to program on the program setting
screen.
3
Press~.
Playback begins in the programmed order.
You can also check the contents of the program. which appears on
the unit's display. Press
B during stop.
o Checking the Program Contents
Press 0 setting playback.
The program setting screen will appear.
47