Quick Select function
Input source, volume level and surround mode settings can be registered to the Quick select buttons (1 - 6).
1
To register the current setting, point the remote control unit at this unit and then press and hold the Quick Select button
you want to register (1-6) for 3 seconds.
0
The status LED on the main unit flashes once when registration is complete.
0
You can also register using the HEOS app.
0
You can change the Quick Select name of the HEOS app. (v
p. 58)
[Default settings]
Button/Default Name Input Source Volume Sound Mode Night Mode Dialog Enhancer
Quick Select 1 HDMI 1 35 MOVIE OFF OFF
Quick Select 2 HDMI 2 35 MOVIE OFF OFF
Quick Select 3 HDMI 3 35 MOVIE OFF OFF
Quick Select 4 HDMI 4 35 MOVIE OFF OFF
Quick Select 5 HDMI ARC 35 MOVIE OFF OFF
Quick Select 6 OPT 35 MOVIE OFF OFF
Contents Setup Use Troubleshooting Status LED Appendix
44
To Next Page
Loading...
