Denon HEOS - Playing Music from Bluetooth Device

Playing music from Bluetooth device
o
Pairing the HEOS device with your Bluetooth
devices
1
Activate the Bluetooth setting on your mobile device.
2
Press and hold the Bluetooth button (V) located on the
back of the HEOS Bar for 3 seconds and release the
button when you see a pattern of two green flashes on
the status LED.
3
Select “HEOS Bar” from the list of available Bluetooth
devices.
In a few seconds your mobile device will indicate that it is connected
to your HEOS Bar.
4
Play music using any app on your device. The sound
will now play from the HEOS Bar.
NOTE
0
Disconnect and reconnect Bluetooth connections from your Bluetooth device.
0
You can also pair devices by pressing and holding the Bluetooth button on the
back of the HEOS Bar.
.
Audio signal
Contents
Setup Use Troubleshooting Status LED Appendix
52