Denon HEOS - Streaming an External Audio Device to any HEOS Device

Streaming an external audio device to
any HEOS device
The sound from the audio device can be played directly on the selected
device or digitized and sent over your network to other HEOS devices.
1
Connect an external audio device to the digital optical,
analog RCA stereo or analog 1/8 inch (3.5 mm) stereo
inputs on the back of the HEOS Bar.
2
Select “Inputs” from the “Music” tab.
3
Select the name of the HEOS Bar and which input to
which you connected the audio device in step 1.
4
Initiate playback on the audio device.
NOTE
0
When a stereo audio cable is connected to AUX IN, the source automatically
switches to Inputs.
.
Audio signal
Contents
Setup Use Troubleshooting Status LED Appendix
50