DENT Instruments powerscout 3037 - Wiring Connections on the Powerscout 3037

38
 The PowerScout 3037 can also be mounted on a 35 mm width DIN rail.
Top hat rail EN 50022
Wiring Connections on the PowerScout 3037
H
igh voltage MAY BE PRESENT. Risk of electric shock. Life threatening voltages may be present.
Qualified personnel only.
H
aute tension peut être présente. Risque de choc électrique. Tensions dangereuses peuvent
être présentes. Personnel qualifié uniquement.
PowerScout 3037 meters have the following connections:
 USB port for powering the meter and communicating during setup, a three-wire connector fo
r
th
e RS-485 BACnet/Modbus link, and an Ethernet port (optional).
 Digital output port. The port can be used to output kWh, kVARh, or kVAh pulses to external
devices, or to toggle on and off to control a remote device or relay.
 Three CT inputs.
 Four voltage connections. Voltage leads are customer supplied. PowerScout meters are self-
powered from L1 and L2.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com