DENT Instruments powerscout 3037 - Page 52

53
CT1 CT2 CT3 Error Description Correction
  
CT 2 and CT 3 are reversed. Switch the position of the CTs flashing red.
   CT 1 and CT 2 are reversed. Switch the position of the CTs flashing red.
   CT 1 is swapped with either CT 2 or CT 3.
Switch CT 1 with CT 2.
-or-
Switch CT 1 with CT 3.
   CT 2 is swapped with either CT 1 or CT 3.
Switch CT 2 with CT 1.
-or-
Switch CT 2 with CT 3.
   CT 3 is swapped with either CT 1 or CT 2.
Switch CT 3 with CT 1.
-or-
Switch CT 3 with CT 2.
   CT 1 and CT 3 are reversed. Switch the position of the CTs flashing red.
Table III-5: PhaseChek LED Error Resolution
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com