DENTSPLY Multimat2Sinter - Rating Plate; 4 Design and Function; Overview

Page 12
3.4 Rating plate
The nameplate is located on the left side of the housing and contains the following information:
 Manufacturer name and address
 Type designation (Type)
 Serial number (S/N)
 Supply voltage and frequency
 Power consumption
 Disposal symbol
 CE mark
 Country and year of manufacture
4 Design and function
4.1 Overview
Fig. 2: Overview
1 Control panel
2 Lifting plate
3 Object bowl
4 Heating chamber (inside the housing)