DENTSPLY Multimat2Sinter - Switch and Button Functions; Display Functions; Scope of Delivery

Page 15
4.5.2 Switch and button functions
Fig. 7: On/Off switch, in On position
Power switch is lit when the power is on
(switch pressed downward)
Buttons
Button
Function
0–9 (numeric buttons)
Enter numbers
F button
Open parameter dialogue
Start/Stop button
Start/stop heating program
Load button
Load heating program from memory
Save button
Save heating program to memory
Timer button
Activate/deactivate timer
S1–S4 level keys
 If standby LED is lit:
Set heating parameters
 Within dialogues:
(make selection depending on dialogue)
4.5.3 Display functions
The structure and operation of the display are described in detail in
section 7, Operation 23.
4.6 Scope of delivery
Crypton
®
version
Furnace
Cable
Argon door
Crypton
®
bell set, assembly
Zirconium oxide beads, Ø 1.25 mm (200 g) for Crypton
Pliers for bowls
Cercon
®
version
Furnace
Cable
Cercon
®
door
Speed sintering bowl assembly, Ø 100 mm
Aluminium oxide beads, Ø 1–2 mm (200 g) for Cercon
Pliers for bowls