Deprag SZG Controller 6 User Manual

013444en
Operating manual
-ORIGINAL-
Feeder Controller
SZG Controller 6 - HSF
362625 B
NOTICE ALL DOCUMENTATIONS!
Before beginning work the safety instructions (pink) and all documentation
referring to this machine have to be read through carefully. Always follow the
instructions during operation. These safety instructions constitute part of the
operating instructions.
Give this booklet and the appropriate operating instruction booklet to the operator.
DEPRAG SCHULZ GMBH u. CO.
PO Box 1352, D-92203 Amberg
Kurfürstenring 12-18, D-92224 Amberg
Service-Hotline +49 (0) 0700 00 371-371
Tel (09621) 371-0
Fax (09621) 371-120
Internet: http://www.deprag.com
E-Mail: info@deprag.de
013444en - Version 3.00- Mar-11 - Technical alterations reserved

Deprag SZG Controller 6 Specifications

General

Brand	Deprag
Model	SZG Controller 6
Category	Controller
Language	English

Summary

Important Documentation and Safety Notice

Introduction to the Feeder Controller

Controller Features and Voltage Input

Details wide voltage input, short circuit proof power pack, and power status indication.

Feeder Controller Versions

Lists available feeder controller versions for series 6, including hand and stationary machines.

Feeder Controller Functionality

Complete Feeder Cycle Phases

Details the phases of the complete feeder cycle, including run times and delays.

Conveyor Segment Cycle Phases

Describes conveyor segment phases, focusing on segment up and down times.

Operation and User Interface

Display and Keypad Description

Explains the controller's display screen and the function of each keypad button.

Menu Navigation and Usage

Provides guidance on accessing and navigating through the controller's menu structure.

Functions and Settings Management

Manual Reload, Test Functions, and Factory Settings

Instructions for manual reload, input/output testing, and restoring factory default settings.

User Management and Password Protection

Details on managing user data, including password protection and user-specific settings.

RFID Functionality

Procedure for programming RFID tags for user identification and switching.

Optional Inlet and Hose Screw Sensors

Details on optional sensors for monitoring feed part presence in the separator or hose.

Optional Fill Level Sensor

Explanation of the optional sensor used to monitor feed part levels in the bin.

User Management and Time Settings

Covers user registration, switching, and configuration of operational time parameters.

Password Protection Settings

Instructions for setting or changing the menu password for enhanced security.

Language Selection

Guide on selecting and displaying the controller software in different languages.

Display Screen Options

Options for selecting display screens, including standard, counter, and combined views.

Optional Accessories

Inlet Control / Hose Screw Sensor

Details on equipping feeders with inlet control or hose screw sensors for part monitoring.

Fill Level Sensor for Bin

Information on fitting a fill level sensor to monitor feed part quantity in the bin.

RFID Accessories

Lists required accessories for RFID functionality, including reader, cables, and chips.

Cable Layout and Connections

External Ping for TYPE x811

Diagram and description of external control connections for the TYPE x811 controller.

External Ping for TYPE 0811-2-EP/1,5

Diagram and description of external control connections for the TYPE 0811-2-EP/1,5 controller.

Signal Duration and Input Configuration

Details on signal timing for START 1-2 and the configuration of three-pole plug inputs.

Plug Configuration and Output Assignments

Explains pin configurations for plugs and lists output assignments.

Error Messages and Operational Status

Service Stations and Authorized Partners