FEEDING TECHNOLOGY
10
4.4 RFID
Image 3: Reader with connection cable and three RFID tags
In menu section RFID the RFID tags (coded chips) can be programmed for all users. The user is
shown at the end of the line in brackets. Use buttons and to choose the required user
number. The corresponding RFID tag is then registered to the reader. The tag ID is displayed on
screen. Press the button
to save the ID to the chosen user name.
After registering the IDs the user can be changed simply by holding the RFID tag briefly up to the
reader.
Thereby the times for up to 10 users can be saved and the feeder can be set to adapt to each
different user.
4.5 Inlet control / hose screw sensor (optional)
Image 4: Various versions of sensors: Inlet control, prox. switch and hose screw sensor
Hand feeders can be equipped with additional controls for scanning feed parts. For example inlet
control (in the separator) and hose screw control (on hose just above mouthpiece).
To Next Page
Loading...
