SGX VIBRATOR MOTOR
7-16 15 Jun 12
HyperPoolShaker
NOTE! Bearings in Derrick vibrator motors are custom designed with loose
internal clearances and are packed with Mobilith SHC
®
100 grease to prolong life.
Regardless of supplier, bearings must be packed with this grease or e
quivalent.
Derrick does not recommend u
se of bearings from an alternative supplier.
SGX MOTOR BEARING REPLACEMENT KITS
Part Number Description Qty
Bearing Replacement Kit - G0003904
G0001696 Bolt, Jack, Hex Skt Hd, M8-1.25 x 70mm, Aly Stl 2
G0001960 Bearing, Vibrator 2
PP1503 O-Ring, 7.90 ID x .070 Cross Section, Viton 2
14266-01 Mount, Bearing, Vibrator, A4140 Stl 2
G0002250 Grease, Vibrator, SHC-100, 10-Oz. Tube 1
Bearing Replacement Kit With Tools - G0003905
G0001696 Bolt, Jack, Hex Skt Hd, M8-1.25 x 70mm, Aly Stl 2
G0001960 Bearing, Vibrator 2
PP1503 O-Ring, 7.90 ID x .070 Cross Section, Viton 2
14266-01 Mount, Bearing, Vibrator, A4140 Stl 2
G0001698 Torque Wrench, 3/8” Drive, 150 to 750 In Lb 1
G0008935 Driver, Hex, 6mm Male, 6.063 L X 3/8” Drive 1
G0001700 Wrench, Hex, T-Handle, 5mm Alloy Stl 1
G0003126 Wrench, Ratchet, 3/8” Drive, Ind. Finish 1
G0008317 Socket, Allen Bit, 5mm Lg, 3/8” Drive 1
G0002250 Grease, Vibrator, SHC-100, 10-Oz. Tube 1
Tools Required
Following is a recommended tool list for use during the bearing replacement procedure:
• Torque wrench (200 to 1000 in lbs)
• Hex wrench (5mm)
• Hex wrench (6mm)
• Dental pick or similar tool
• Clean, absorbent cloths
• Safety glasses
• Heat-resistant gloves (250° F or higher)
• Welder’s torch
• Bearing heater
To Next Page
Loading...
Need help?
General
