21
SEATING SYSTEM
Fitting the Seating System onto the Body
Before fitting the seating system, make sure you know which
position is best for your child:
• The seat depth (colour-coded) is the distance from the
back of the seat to the front of the seat. The current seat
depth colour (found by looking at the coloured circles
where the seat back meets the seat, see Fig. 29 on page
31) shows which set of coloured holes to use when fitting
the seating system into the body, e.g. yellow.
• The backrest recline describes whether the backrest is
upright at 90 degrees to the seat or slightly reclined at 97
degrees to the seat. This is chosen by using the front
(upright) or back (reclined) set of holes that match the seat
depth colour, e.g. front set of holes.
• The tilt-in-space describes how much the whole seating
system is tilted. This is chosen by how far down the seating
system is placed into Wizzybug’s body, e.g. third hole from
the top.
Find out more about choosing and setting the seat depth, tilt-in-
space, and backrest recline on page 30.
When you know which seating position to use, fit the seating
system into Wizzybug’s body as follows on page 22.
To Next Page
Loading...