33
5. Squeeze the black seat release knob and
lift the whole seat up and backwards into
the top of the next coloured slot in the
metal grid. (Only move the seat
backwards by one coloured slot at a
time.) Let go of the seat release knob so
that the seat pins fit into the top holes.
The seat is now in the slot that matches
the new seat depth colour.
Fig. 32 Moving the Seat Backwards
6. Repeat steps 4 and 5 until the seat depth is correct (see Fig. 28
on page 30).
7. Move the seat to your usual tilt-in-space (lower or higher
holes) and upright or recline position (front or back holes)
within the new coloured slot (see page 21).
8. Turn the white dial fully clockwise to lock the seat.
9. Move the armrests back down to your child’s chosen position
and clip the carer control onto the back of the headrest.
To Next Page
Loading...
