Designability WizzyBug - Fig. 34 Making the Seat Depth Shorter

35
5. Reach under the back of the seat base and pull up the back of
the seat base as far as you can, then tilt the backrest
backwards as far as you can until it clicks into place. The seat
depth is now one size shorter and has a new colour setting
which matches the new coloured slot in the metal grid.
6. Repeat steps 4 and 5 until the seat depth is correct (see Fig. 28
on page 30).
7. Move the seat to your usual tilt-in-space (lower or higher
holes) and upright or recline position (front or back holes)
within the new coloured slot (see page 21).
8. Turn the white dial fully clockwise to lock the seat.
9. Move the armrests back down to your child’s chosen position
and clip the carer control onto the back of the headrest.
Fig. 34 Making the
Seat Depth Shorter