Detcon FP-700 - 10 Revision Log

Model FP-700
FP-700 Instruction Manual Rev. 5.1 Page 44 of 46
10. Revision Log
Revision
Date
Changes made
Approval
2.0
02/29/2008
Previous issue
N/A
2.1
04/25/2011
Removed Teflon note in section 2.5. Added Revision Log Section
10.
LU
2.2
07/11/11
Adding Inrush current information to specifications, drawing for
aluminum condulet dimensional
LU
2.3
04/16/12
Changed cable recommendation, updated the Modbus Register
Map
LU
2.4
01/07/13
Updated ATEX approvals label, updated EN standards that sensor
assembly meets. Updated ATEX listing in specifications
BM
2.5
04/02/13
Updated ATEX installation instructions regarding use of ring
terminal for earth ground using screw and lock-washer. Updated
guidelines for metric special fasteners used in 700 assembly
BM
2.6
04/05/13
Added 0-50% LEL range
LU
2.7
11/11/13
Updated approvals label, add information on 4-20mA problems
BM
2.8
11/20/13
Correct Modbus™ Register Map
LU
2.9
12/13/13
Updated Field Wiring Section
BM
3.0
02/28/14
Update 4-20mA wiring and Specifications
BM
4.0
06/16/16
Update cert specs, update technical information.
MM
5.0
04/17/18
Updates for ANSI/UL 12.13.01:2013 Performance Testing
BM
5.1
06/05/18
Updated Conduit Seal in Section 2.5
MM