Deutz BL 1011F - Mechanical Shutdown; Electrical Shutdown

32
3
26 424 0
25 746 2
2
1
Engine Operation
3.4 Stopping
3.4.1 Mechanical Shutdown
● Move speed control lever 1 to low idle.
● Operate shutdown lever 2 until the engine comes
to a stop. The charge pilot light and the oil
pressure pilot light will come on when the engine
stops.
● Turn key counterclockwise (to position 0) and
remove. The pilot lights will go out.
3.4.2 Electrical Shutdown
(Ignition Key)
● Turn key counterclockwise (to position 0) and
remove. The pilot lights will go out.
If possible, do not suddenly switch off the engine
when under full load.