Deutz BL 1011F - Maintenance Schedule and Chart

40
5
1000
2000
3000
750
500
250
125
2)
50-150
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Routine Maintenance
5.1 Maintenance Schedule
check
clean
change
Operation
see
Section
Operating Hours (OP) every 1)
once
after
every
10 OH
or daily
1) recommended maximum
2) once when commissioning new and reconditioned engines
3) clean if needed
4)Oil quality API-CF-4, CG-4, CH-4 or ACEA-E1-3/96 and E4-98
5) change if required
6) for oil change intervals, naturally aspirated engines, see
Section 6.1.1
7) for oil change intervals, turbocharged engines, see Section 6.1.1
8) without toothed belt ventilation renew after 3000 running hours, after 5 years at the
latest if running hours are not reached: in both cases together with idler pulley
with toothed belt ventilation renew after 4500 running hours, after 5 years at the latest
if running hours are not reached: in both cases together with idler pulley
9) during run-in period, check 2 x daily
10) retensioning of toothed belts is not permitted
11) Change at the latest after 2 years .
Oil level in engine / separate container
9)
6.1.2/3.1.4
Engine leaks
Oil bath- and dry type air cleaners
3) 4) 5)
6.4
Battery and cable connectors 6.7.1
Cooling system (depending on engine use
3)
6.3.1
Engine oil (depending on engine use)
4) 6)
6.1.1
Oil filter cartridge (depending on oil change interval)
4) 6)
6.1.3
Fuel filter cartridge 6.2.1
Valve clearance (adjust if necessary) 6.6.1
Engine mounts (retighten if necessary) 9.2
V-belts (retension if necessary) 6.5
Toothed belts
8) 10)
Injection valves
Fuel pump / strainer
5)
6.2.2
Fuel leakage line (change defective lines)
11)
6.2.3
The specified engine maintenance times are maximum values. Depending on the operating environment, shorter maintenance intervals may be required. Please
observe the operating instructions of the equipment manufacturer.
●
●
●
●
● ● ● ● ●
●●
7)
●
6)
●●
7)
●
6)
● ●
●
2)
●
●
●●
●
●
●