11 Gerade
2
11
26 431 0
26 387 0
!
2.1.4 Cylinder Numbering
2.1 Model
Cylinders are numbered consecutively, beginning
at the flywheel end.
2.1.5 Fuel Delivery Lock
The manufacturer shall not be held liable for dam-
ages resulting from adjustments made to the regu-
lator by the operator.
The lock screws are protected in order to prevent
this:
1. with locking paint on model:
torque balancer
2. with plastic protective cap on model:
without torque balancer.
Adjustments to the regulator are to
be carried out only by authorized
DEUTZ SERVICE - specialists.
Engine Description
1234
7343en_k02_pdf 05.10.1999, 9:21 Uhr11
To Next Page
Loading...
