ineo 4050/4750 2-5
2.1 About this machine
2
2.1.2 Option configuration
No. Name Description
1 Keypad KP-P01 Located on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
2 Authentication Unit
AU-201/AU-201S
Performs user authentication by scanning information recorded on
the IC card or the NFC-compatible mobile terminal (Android terminal).
3 Finisher FS-P02 Staples the printed sheets.
For staples, use Staple Kit SK-501.
4 Paper Feed Unit
PF-P11
Allows you to load up to 250 sheets of paper.
There are three slots in which the Paper Feed Unit can be installed.
5 Paper Feed Unit
PF-P12
Allows you to load up to 550 sheets of paper.
There are three slots in which the Paper Feed Unit can be installed.
6 DESK DK-P02 Used to install this machine on the floor.
This component may not be able to be used depending on the region
the machine is used in.
The following optional components are built into this machine and are not shown in the figure above.
7 Fax Kit FK-512 Used to operate this machine as a fax machine.
8 Mount Kit MK-P03 This unit is required to install the Fax Kit.
9Local Interface Kit
EK-P04
Used to add an RS-232C port.
10 i-Option LK-101 v3 Supports the web browser function that is one of the advanced func-
tions.
11 i-Option LK-106 Used to add a bar code font, which is one of special fonts.
12 i-Option LK-107 Used to add a unicode font, which is one of special fonts.
13 i-Option LK-108 Used to add an OCR font, which is one of special fonts.
14 i-Option LK-111 Supports the ThinPrint function, which is one of a number of ad-
vanced functions.
15 Network Interface
Card NC-P03
Enables use of this machine in a wireless network environment.
5 4
6
2
3
1
To Next Page
Loading...
