Develop ineo 4050 - Manual Notations and Symbols

ineo 4050/4750 1-5
1.4 Notations and symbols used in this manual
1
1.4 Notations and symbols used in this manual
Procedural instruction
0 This check mark symbol shows a precondition of a procedure.
1 This format number "1" represents the first step.
2 This format number represents the order of consecutive steps.
% This symbol indicates a supplementary explanation of a procedural instruction.
Symbols used in this manual
7WARNING
- This symbol indicates that a failure to heed the instructions may lead to death or serious injury.
7CAUTION
- This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury
or property damage.
NOTICE
This symbol indicates a risk that may result in damage to this machine or documents.
Follow the instructions to avoid property damage.
Tips
This symbol indicates supplemental information of a topic as well as options required to use a function.
dReference
This symbol indicates reference functions related to a topic.
Related setting
This shows the settings related to a particular topic for any user.
Related setting (for the administrator)
This shows the settings related to a topic only for administrators.
Product and key names
Notations of application names
This manual describes application names as shown below.
Notations used
in this manual
Description
% This check mark symbol shows a precondition of a procedure.
0 This symbol indicates a supplementary explanation of a procedural instruction.
[ ] An item enclosed in brackets [ ] indicates a key name on the Touch Panel or com-
puter screen, or the name of a user's guide.
Bold text This presents a key name, part name, product name, or option name on the Control
Panel.
Application name Notations used in this manual
PageScope Web Connection Web Connection