Develop ineo 4050 - Page 69

ineo 4050/4750 5-23
5.6 Registering a destination
5
[WebDAV]
[Internet Fax]
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Settings].
- To change the settings for a registered destination, select the registered name, then tap [Edit].
- To delete a registered destination, select the registered name, then tap [Delete].
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorite] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[Connection] Register information of the destination WebDAV server.
[Host Name] Enter the host name or IP address of the destination WebDAV server (using up
to 253 bytes).
• Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the name of the storage folder in the WebDAV server specified in [Host
Name] (using up to 96 bytes).
• Entry example: "scan"
When specifying a folder in the WebDAV folder, insert a symbol, "/", between
the folder names.
• Entry example: "scan\document"
[User ID] Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 63 bytes).
[Password] Enter the password (using up to 63 bytes).
[Detail Setting] Configure settings to establish communications with the WebDAV server.
• [Port No.]: If necessary, change the port number. Normally, you can use the
original port number. [80] is specified by default.
• [Proxy]: If a proxy server is used in your environment, select [ON]. [OFF] is
specified by default.
• [SSL Setting]: If SSL is used in your environment, select [ON]. [OFF] is
specified by default.
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorite] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[E-mail] Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
[Details] Enables you to check the E-mail address you entered in [E-mail].
[Receiver RX Ability] Select [Compression Method] and [Resolution] respectively as the specifica-
tions of the original data that can be received on the destination device.